Advertisement
Garage doors are a vital part of any home. They provide security, protect your belongings, and can even enhance the curb appeal of your home. However, like anything else in your home, they can sometimes run into problems. Here are six common garage door problems and how to fix them, written by the experts at Olympus Garage Door Repair in Damascus, MD.
- The door won’t open or close
If your garage door won’t open or close, the first thing you should check is the remote control. If the batteries are dead, simply replacing them will usually fix the problem. If that doesn’t work, there could be an issue with the photo eyes, which are sensors that prevent the door from closing if something is in the way. Dust and dirt can sometimes build up on these sensors and cause them to malfunction. Cleaning them off with a cloth should do the trick. If that doesn’t work, you may need to call a professional for help.
If you’re unable to open your garage door using the opener, you may manually raise it instead, as shown in this article: How to Open a Garage Door Manually.
- The garage door is making strange noises
If your garage door is making strange noises, it could be due to a variety of issues. The tracks may need to be lubricated, the springs could be worn out, or there could be something caught in the door. Try lubricating the tracks first to see if that fixes the problem.
if lubrication doesn’t help, it’s time to call a professional garage door company. It’s possible that the rollers are damaged and that you should replace them with nylon garage door rollers, which are better quality than the alternatives.
- The door is leaking oil
If you notice that your garage door is leaking oil, it’s probably due to a problem with the opener. First, try to clean the opener with a rag. If that doesn’t work, you may need to replace the opener. We recommend calling a professional for help with this one, as it can be tricky to do yourself. if your garage door opener is old, it’s a good idea to replace it with one of the newer, more energy-efficient models.
- The remote is not working
If your garage door remote is not working, the first thing you should check is the batteries. If they are dead, simply replacing them will usually fix the problem. If that doesn’t work, there could be an issue with the photo eyes, which are sensors that prevent the door from closing if something is in the way. Dust and dirt can sometimes build up on these sensors and cause them to malfunction. Cleaning them off with a cloth should do the trick. If that doesn’t work, you may need to call a professional for help.
- How to Reprogram Your Garage Door and Opener
If you have a newer garage door opener that has a rolling code, then you will need to follow these steps in order to reprogram it:
- Locate the “learn” button on your garage door opener. This is usually a small, black, square button that is located on the back or side of the garage door opener unit.
- Press and hold the “learn” button for approximately six seconds until the indicator light next to it begins to flash.
- Enter your desired four-digit code into the keypad on your garage door opener unit. The indicator light will flash again to indicate that the code has been accepted.
- Release the “learn” button and your new code should now be programmed into the garage door opener! If you have any problems, consult the user manual for your particular model of garage door opener.
If you have an older garage door opener that does not have a rolling code, then you can simply reprogram it by following these steps:
- Locate the ” learn” button on your garage door opener. This is usually a small, black, square button that is located on the back or side of the garage door opener unit.
- Press and hold the “learn” button for approximately six seconds until the indicator light next to it begins to flash.
- Enter your desired four-digit code into the keypad on your garage door opener unit. The indicator light will flash again to indicate that the code has been accepted.
- Release the “learn” button and your new code should now be programmed into the garage door opener! If you have any problems, consult the user manual for your particular model of garage door opener.