Advertisement

Epoxy flooring is one of the toughest, most resilient floors on the market today. Used everywhere, from garages and basements to warehouses and factory floors, epoxy is highly versatile.

These durable flooring systems can handle high impacts, rough abrasions, and large volumes of foot and vehicle traffic. So, once you have an epoxy floor installed, the question is:

“How do you maintain an epoxy floor?”

Continue reading as we give you 6 easy tips for maintaining an epoxy floor.

1. Keep the Surface Dirt and Debris-free

If dirt and debris are left to sit on your epoxy floor, they can embed or scratch the finish on your floor, especially if your space is exposed to vehicles and heavy equipment. You should sweep or dust mop epoxy flooring regularly to remove any sand, dirt, or grit.

These floors may be sturdy, but they can start to show damage from continuous scratches over time. Routinely sweeping away this debris will ensure that your floor stays beautiful for years to come.

2. Avoid Soap-based Cleaners

Using soap-based cleaners on your epoxy floor can leave a haze that will continuously build up over time. Acidic or citrus-based cleaners should also be avoided, as they can leave a residue that can make your floor slippery.

So long as your epoxy isn’t overly soiled, merely using warm water and a wet mop is more than enough for routine maintenance.

3. Spot Clean When Necessary

There’s no need to mop your entire floor if someone tracks in some mud or if a spill occurs. Vacuum or sweep up any solid debris that has been tracked onto the floor and mop up any spills that happen.

Spot cleaning is a reliable method for keeping your epoxy flooring clean without unnecessary over-cleaning. Not to mention, epoxy is remarkably water-resistant, so cleaning up spills should require minimal work.

4. What to Do When Epoxy Becomes Heavily Soiled

Let’s face it, your epoxy floor will likely become dirty at some point. When this happens, getting it clean doesn’t have to be challenging. Move any items from the floor that may get in the way of cleaning. Sweep or dust mop the entire floor to clear any loose dirt or debris.

After the floor has been swept, mop the floor with warm water to loosen any stuck-on dirt or grime. Lastly, you can mix two to three ounces of ammonia per gallon of hot water for a second mopping to get the floor sparkling clean.

5. How to Remove Stains

Though epoxy flooring is resistant to many forms of staining, stains can happen. If a spill is left unnoticed or rusting metal is left on the floor for prolonged times, a stain may form.

A scrubbing sponge or soft-bristled brush combined with a mild cleaner, such as Soft-Scrub, can get many stains out of your floor. Avoid using steel wool or harsh chemicals, such as Comet, as they are too abrasive. As we mentioned above, avoid citrus cleaners or acidic cleaners that can break down the surface of the epoxy floor.

6. Clean Up Chemicals Immediately

We understand that accidents happen. When chemicals, such as gas, oil, antifreeze, paint, or other abrasive liquids, are spilled on the floor, they should be cleaned immediately.

Harsh chemicals that are allowed to sit on your epoxy will start to break it down over time. Any spills that occur need to be wiped up with the shop towels or paper towels immediately. If the chemical is a skin irritant, be sure to wear appropriate PPE, like gloves.

What’s Next?

Now you know some tips on how to keep maintaining your epoxy floor an easy and fast process. Keep dirt and grit off the floor, avoid soap-based cleaners, spot clean, and clean up chemicals immediately. Overly dirty floors can be mopped clean with a water/ammonia mix, and most stains can be easily lifted with a soft-bristled brush and a mild cleaner.

When an epoxy floor is appropriately maintained and cared for, it can last for over 25 years! Follow these quick and easy tips, and your epoxy flooring system will do the same.