Advertisement

Whether constructing or replacing an existing driveway, you have to choose what kind of material is going to be used. For some homeowners, selecting a material to pave their driveway is all about cost. Then there are homeowners that dread having any kind of work or improvements done on their homes, so they always pick the materials which are the longest lasting. Last but certainly not least, some choose asphalt, concrete, gravel, or even pavers for their driveways, solely based on what the finished product looks like.

Figuring Out the Cost of Your New Driveway

Determining how much it is going to cost to roll out a fresh new driveway is pretty simple. Measure the length and width of your driveway, then you can come up with a ballpark estimate for each available material. For example, concrete is almost twice as expensive as asphalt. If you call a contractor you can get an exact cost per foot, then multiply that against the total square number of feet your driveway is made up of. You will know which materials are in your budget versus which materials might be too pricy immediately.

Driveway Materials and Durability

Asphalt is less expensive than concrete in general, but this driveway material just isn’t going to be the best for homeowners in certain regions. In areas where the weather gets extremely hot, asphalt has been known to warp because of heat. Other asphalt vs concrete driveways pros and cons include potential cracking, expense, and downtime. Ultimately, when you have a residential driveway made, you are going to need to make a decision and then just trust the professional contractors you brought in to complete the job.

Selecting a Material for Your Driveway Based on Aesthetics

When preparing to repave your own driveway or hiring an outside contractor to do it for you, the end result is going to be the most important part. Sure, you might decide to purchase some interlocking pavers and spend the weekend working on a DIY home improvement project, but the only factor you and your family are going to care about is the aesthetics. So, when thinking of what material is going to work best in your driveway, don’t forget about how the finished project is going to turn out. Asphalt is dark and has a slightly bumpy texture. Concrete is generally a bit lighter but you can also etch or even stain a finished driveway. Gravel is, well, a bunch of small rocks that tend to come in grey or deep red earthy tones. Pavers come in a lot of different colors, but they also tend to be the priciest option.

By choosing a material that has the best balance of all three above mentioned factors, you can have a new driveway constructed that is perfect for your home, your region, and your budget. Take into consideration the fact that driveways aren’t replaced every couple of years. Instead, you shouldn’t have to do anything with your driveway again for at least a decade or two. The material that you use to construct or replace your driveway can end up driving the value of your home up, and perhaps even influence your neighbors into making some improvements of their own.