Whenever designing your kitchen layout, you ought to be aware that a kitchen backsplash is a decorative and colourful region that prevents food from splashing on the kitchen walls. You protect the walls in the kitchen by using kitchen b.
Renovating your kitchen with a backsplash may add years to the life of your kitchen. However, prices might vary greatly depending on the style of backsplash you want and how much you require.
In this article about how much does backsplash cost, we’ll walk you through backsplash installation prices and the factors you should think about when choosing a backsplash for your kitchen.
Backsplash Installation Cost
The standard price of installing a backsplash in your kitchen is $1,000. It is possible to spend as little as $600 or as much as $1,350.
Your local tile contractor may charge you a minimum of $160 for labour or $10 per square foot for materials. If not, they may give you a labour estimate of $40 to $60 per hour.
How much does backsplash cost is an important question to ask, because the price can vary greatly. This depends on the type of backsplash material used and the amount of backsplash required. If you want a beautiful marble backsplash behind your stand mixer, it will be more expensive than if you like the more rustic aesthetic of tin.
Factors Affecting the Cost of Kitchen Backsplash
The following factors influence the price of constructing a kitchen backsplash:
Scope of Project
The expense of installing a kitchen backsplash will certainly vary based on the size of the area to be covered. If you only want a backsplash between the base cabinets and the top cabinets, the labour expenses will be cheaper than if you want to cover the full exposed section of the wall.
Material and Finishing of The Tile
The material you intend to use for your backsplash. Because peel and stick installations are basic, they will be at the lower end of the spectrum. Most sophisticated designs, on the other hand, will cost you more, depending on what your contractor charges for your kitchen remodelling job.
The Complexity of The Patterns on The Material
Angles, cuts, and the areas it must fit into can all raise or decrease the cost. Expensive patterns, like mosaic or herringbone, may be more expensive. They take more time and work, and you must cut them carefully to keep the design. The contractor may charge you up to $100 per hour for this project, and installation may take up to 5 days.
Whether an Existing Backsplash Needs to Be Removed
If you need to have an existing backsplash removed, consider the labour cost, which includes prepping the wall for the new tile. If removing the existing backsplash caused damage to the wall, this must be rectified before any installation can take place.
Material Transport Cost
Some supplies need direct delivery from the seller to your home, which may raise the overall cost.
Per Square Foot Cost of Different Materials
This kind of material is a major role in backsplash installation costs. The most popular is tile, although there are appealing choices at all price levels.
The cost of installing a kitchen backsplash per square foot for your kitchen makeover might range between $10 and $40. However, the material you choose will have a significant impact on the final cost.
Ceramic tile is the least priced material option, often costing $2 per square foot with an installation fee of $25 per square foot.
Ceramic is very easy to cut, making it ideal for rooms with tricky corners or a large number of wall fittings. It is also long-lasting and low-maintenance, although it is not advisable to try to install it yourself.
Porcelain is somewhat more expensive than ceramic, and the price per square foot ranges between $3 and $5. It is also a highly sensitive material that must be installed by specialists throughout your kitchen makeover. As a result, you will have to pay for installation individually. Installation costs roughly $25 per square foot, which is comparable to ceramic.
Stone backsplashes, such as marble or granite, are expensive, costing between $7 and $10 per square foot. The installation cost for these materials is around $30 per square foot, which may add up quickly.
Glass is one of the priciest kitchen backsplash materials available. When compared to other backsplash materials, glass tiles provide a great deal of adaptability and customisation. The average cost of installing a glass backsplash is $30 per square foot. Installing a glass backsplash necessitates a large budget because it may be rather costly.
A stainless steel backsplash gives your kitchen a distinctly modern flair. The majority of homeowners mount it over the stove or oven. One of the most significant advantages of stainless steel is its ease of cleaning and maintenance. When you choose a stainless steel backsplash, you can expect to pay up to $20 per square foot.
The farmhouse-chic style is here to stay, and it has brought with it more economical but nonetheless visually stunning design possibilities. A tin backsplash is a low-maintenance choice that is also less expensive than most other backsplash materials, costing between $10 and $30 per square foot (including installation).
DIY vs. Hiring a Tiler
In addition to your material expenses, a contractor may charge you a minimum fee of $160 plus $10 per square foot. In addition, they may charge $40 to $60 per hour for work. While it may be costly, hiring a professional is the quickest and safest method to get the task done with the least amount of waste.
Before tiling, your walls may require extra cleaning and preparation, especially if existing tile must be removed first. Professionals will have the necessary tools and skills to do the task in a timely manner.
Peel-and-stick installations are less complicated and would cost around $40 per hour. If you choose a more intricate design, your pro may charge a greater fee.
Extensive mosaic and herringbone designs, for example, will need more cutting, time, and effort. For complicated designs, some builders may charge up to $100 per hour.
Depending on the size of the area and the complexity of the job, you may pay $400 to $500 every day. Even the simplest task might take up to two days. Contractors prepare and install on the first day. On the second day, they normally conduct the grouting, washing, and sealing. This stage should take at least a half-day to accomplish.
The main advantage of hiring a professional is that they will already have all of the necessary instruments. If you opt to do it yourself, you’ll need to buy or rent a number of tools and materials. You should anticipate spending around $300 on this DIY project after purchasing a trowel, rubber float, cement backer board, grout, caulk, and spacers.
DIYers may find it difficult to cut intricate patterns and may lack the line laser required for elaborate designs. There is also the possibility of purchasing too much stuff and squandering money. It’s up to you how much of a statement you want to make with your backsplash, whether it’s professionally placed or done yourself.
What Are the Different Styles, Patterns, And Shapes for A Kitchen Backsplash?
Tile size, material type, finish, pattern, amount of the area covered, and your contractor’s costs are all price variables. Here’s a look at some of the most prevalent trends in this industry.
Subway tile is a popular material for backsplashes, although it’s actually more of a pattern than a substance. The majority of subway tiles are made of ceramic. The rectangular tiles are designed to resemble New York City subway tiles and are often laid in an offset pattern.
Because mosaic tile is frequently made up of diverse materials, estimating how much you would pay for it is tricky. It will be less expensive if the design comes prefabricated on some form of the backdrop. If not, having each piece separately cut for the design may be prohibitively expensive.
High Gloss Tile
High gloss tile is extremely bright and reflective, and it is especially popular when coupled with a subway tile design. The shinier your tile, the easier it is to scratch. Scratch-resistant tiles have a matte appearance.
Penny tiles are circular ceramic or glass tiles put in mortar. They are very customisable and may be used to make complicated patterns or to spell out anything.
This is a big sheet or sheets of unbroken material with few joints, sometimes known as a “solid slab”.
Herringbone backsplashes are made out of rectangular tiles that form a repeating “V” pattern.
Other Factors to Consider
There are a number of other factors that might influence the cost of your backsplash installation project:
Return on Investment
One thing to keep in mind is that adding a backsplash to your kitchen might really increase the value of your home. While the installation may cost some money upfront, you may receive a good return on your investment.
Cost to Remove Backsplash
The cost of removing tile might range between $300 and $650. The typical cost of removing a backsplash is between $3 and $6 per square foot. You may also have to spend an extra $100 to $150 for debris removal. Your quote is typically determined by the magnitude of the assignment.
Ease of Maintenance
Simply explained, certain materials require far less maintenance than others. While stainless steel may just require an all-purpose cleaner, some materials, such as natural stone, may necessitate the use of specialist cleaning equipment or supplies.
Some of the higher-quality materials may even need expert upkeep. This is something else you should consider while making your budget. While it may simply be a one-time investment, paying for frequent cleaning services may mount up over time.
Backsplash Installation Costs at a Glance
Installing a kitchen backsplash creates a focal point that may completely transform the aesthetic of your kitchen, bringing in colour, texture, and personality that was before lacking.
- Average total installation cost: $1,500; range: $900-$2,500
- Ceramic tile costs between $1 and $10 per square foot.
- Porcelain costs between $3 and $5 per square foot.
- Natural stone tile costs between $7 and $10 per square foot.
- Glass tile costs between $20 and $30 per square foot.
- Stainless steel costs more than $20 per square foot.
- Cost of labor: $40-$60 per hour
We hope this article about how much does backsplash cost gave you enough useful information to prepare for your project.
If you enjoyed reading this article about how much does backsplash cost, we also wrote about subjects like what type of caulk to use for backsplash, how to apply grout to the backsplash, what backsplash goes with black granite, how to remove backsplash tile, how to hide outlets in the backsplash, what backsplash goes with Taj Mahal quartzite, how to clean brick backsplash, what backsplash goes with granite countertops or what backsplash goes with white cabinets.