Advertisement
A sink and the cabinets that surround it form a bathroom vanity. It serves as storage as well as a cover for exposed plumbing, keeping everything looking neat and clean. In certain cases, bathroom vanities may be quite streamlined. A bathroom vanity may be of any design, be large or little, minimalist or maximalist, and have drab or bright colors. Additionally, there are a variety of websites such as vanderloc Vanity where you may look at custom designed vanities.
It’s easier to install a new vanity if it comes with a countertop and sink built in. The top is detachable from the vanity cabinet. The cabinet features an open top and back, making it simple to install and secure from above. A backsplash piece is included in some vanity sets. After your countertop has been fastened, this is usually put with caulk or glue.
Find the wall studs.
One of the most essential as well as important steps on how to replace your bathroom vanity is to find the wall studs. It is quite essential to at least find one with an electronic stud finder. Make a mark in the stud’s center.
Install and Secure the Vanity
Another one of the most essential as well as important steps on how to replace your bathroom vanity is to install as well as secure the vanity that you are installing. Measure the vanity cabinet’s height and transfer that measurement to the rear wall. Place the vanity cabinet where you want it. Use wood shims placed beneath the cabinet to level it if necessary.
Fill in the Side Vacuum
Another one of the most essential as well as important steps on how to replace your bathroom vanity is to fill in the side vacuum. If there is a large or unsightly gap between cabinets as well as the walls, you can cover it with a filler strip that is narrow.
Attach the Sidewall
This step is often forgotten by a lot of different people but this step can be quite crucial depending on which style you want to go for. All you have to do is attach your bathroom vanity that you are installing to your sidewall.
the installation of the vanity top
If the sink is not an inherent part of the countertop, connect it to the countertop. Follow the manufacturer’s instructions when installing the faucet and drain fittings.
Install the Backsplash
If your vanity has a separate backsplash, apply a bead of construction adhesive to the rear of the backsplash in a serpentine pattern and push it firmly against the wall.
The Final Words
After reading this article, now you know everything about the bathroom vanities including but not limited to the steps as well as tips that are important for replacing the bathroom vanity in your house. All you have to do now is make sure that you read this article very carefully as well as implement these tips when you are replacing the bathroom vanity in your house.