Advertisement

There’s a good possibility that you might find yourself on the wrong side of a shut door at some point, whether it’s because your four-year-old locked himself in the toilet or because you went out of the locked garage only to discover that your keys were still inside.

This inconvenience of being unable to enter our own house, workplace, or car due to forgetting, misplacing, or losing our keys can be dreadfully exasperating. Now, this is a locksmith’s job, isn’t it? Although they are unquestionably adept at what they do and are helpful, they aren’t always accessible, especially in emergencies. Unless of course, there’s a local, reliable, and life-saving locksmith around you such as this Phoenix Locksmith.

Just in case there isn’t and fortunately so, most locks can be easily picked with commonly available household equipment before you engage a locksmith for a potentially pricey home visit. The instructions in this guideline will show you how to select a privacy doorknob, such as the kind that is typically seen on bathroom and bedroom doors, as well as an entry door handle that requires a key, using simple everyday items.

Determine the kind of lock you are working with

The majority of privacy door knobs sometimes referred to as “bed and bath” door knobs, include a pushbutton or a twisting lock mechanism on the inner doorknob. An emergency exit will be made possible through a small hole in the center of the exterior doorknob.

First, establish if the lock is a twisting or a push button lock. If the lock has just a tiny little hole and not a keyhole, then you must use the procedure for picking a locked door.

Find a tool that will work for picking the lock.

1. Create a tension wrench.

Take a safety pin or hair clip, fold it midway, and bend it into an L shape. Use a strong paper clip or hairpin because the tension wrench ought to be quite firm. A tiny flat-head screwdriver or another tool that fits in the bottom of the keyhole can also be used as a tension wrench.

To apply tension to the lock, first place the tension wrench into the bottom portion of the lock and turn it in the same direction you would turn the key to unlock it. Maintain this strain throughout the entire procedure. Then slowly insert the pick into the top of the lock by gently moving your hand up and down. As the lock’s various pins are raised, a series of clicks should be audible. The tension wrench will suddenly rotate freely and unlock the door once you have successfully raised all of the pins.

Most locks can be picked in a matter of seconds, but it takes some practice. Simply take a few deep breaths if you become frustrated, and then restart.

Numerous deadbolts and padlocks can be opened using this method as well.

2. Use bobby pins

One of the most popular methods for opening doors is the bobby pin lock pick. It is referred to as a “rake pick” and can be used to unlock any door with tumbler locking mechanisms. One of the most fundamental and user-friendly is this.

This practical hack trick is as easy as using a bobby pin. But doing it is not that simple. You must locate a bobby pin that is tiny and extremely flexible for this life hack to work – the more flexible, the better

3. Make use of a screwdriver

It is simple to unlock a door without a key by using a screwdriver. Find the one that fits your lock the best, and then slide it into the little space between the door and frame just above the handle or knob. Simply place the tip of the screwdriver into the space between the bottom of the door and the floor while holding the tool in your right hand. When you hear a click, turn counterclockwise. When you hear another click, turn once more in a clockwise direction. Finally, let the door open.

4. Using a credit card to unlock a locked doorknob

Find a card that works. A plastic card that is sufficiently rigid but also somewhat flexible will be the best. Take note that using your real credit or debit card could cause damage to it. An excellent option is a laminated library card or a grocery shop loyalty card. On some locks, even a sturdy business card will work.

Slide the card into the space left by the doorjamb after taking it out. Slide the card in by starting right above the door handle and moving downward. If you’re lucky, the card will push against the latch assembly and open the door even if you have to move it around a little

Only standard key locks respond to this strategy. It is impossible to unlock a deadbolt.

Using this method, some doors open almost instantaneously, while others require more work. Play around with various cards and viewing angles.

Keep in mind that this method only works to go around the lock; it does not truly unlock the door. You can become locked out again if you allow the door to close.

5. Make use of a knife

If you know how, a knife can be used to open your door. To begin with, you insert your knife between the top of the keyhole and the top of the actual lock. The door may then be unlocked by making a light downward pressure.

6. Take away the doorknob

Since most privacy door handles are kept together with two clearly visible screws, the aforementioned technique will not work to unlock them. Simply undo these screws using a suitable screwdriver. Both doorknobs will dislodge in a brief period of time. Open the door by simply yanking the hole’s remaining locking mechanism out.  The two screws should be switched as you proceed; this is recommended.

The doorknob may need to be pulled tighter when the screws become loosened.

The screws may occasionally be covered with an ornamental collar. If so, this collar must first be taken off by putting a paperclip in the smallest hole that the collar has, if one exists, in order to release it.