Advertisement

Your garage door is one of the most used items in your home, so it’s important to keep it well-maintained. By following these simple preventive maintenance tips, you can keep your garage door working properly for years to come.

The experts at Slick Garage Doors recommend performing the following preventive maintenance tasks at least once a year:

  1. Inspect the door regularly

Inspect your garage door regularly for signs of wear and tear. Look for cracks or splits between the panels, rust on the tracks, and loose hardware. If you notice any damage, have it repaired immediately to prevent further wear and tear.

  1. Keep the tracks clean

The tracks that your garage door runs on should be kept clean and free of debris. Use a brush or vacuum to remove dirt, dust, and grime from the tracks. You may also need to lubricate the tracks occasionally to keep them running smoothly.

  1. Lubricate the moving parts

Lubricating the moving parts of your garage door will help keep it running smoothly. Apply a silicone-based lubricant to the tracks, rollers, hinges, and springs. Avoid using grease or oil-based lubricants as they can attract dirt and debris. Another option is to hire a professional garage door service to perform an annual tune-up, which will include lubricating the door’s moving parts. The experts at Garage Door Repair Bowie MD highly recommend using only WD-40 to lubricate your door. WD-40 is a product that has many purposes, one of which is to lubricate moving parts.

  1. Tighten loose hardware

Tighten any loose hardware on your garage door to prevent rattling and damage. Check the hinges, rollers, springs, tracks, and cables for looseness. Use a wrench or socket set to tighten any nuts or bolts that are coming loose. You can always hire a professional garage door service to perform this task for you.

  1. Inspect the cables

The cables that lift your garage door are under a lot of tension and can become frayed or broken over time. Inspect the cables regularly for signs of wear and tear and have them replaced if necessary. The cables should be replaced by a professional garage door service to ensure they are installed correctly.

  1. Test the balance

Periodically test the balance of your garage door to ensure that it is lifting evenly. Place a 2×4 board in the center of the door and raise it halfway up. The door should stay in place and not move up or down. If the door is unbalanced, have a professional garage door service adjust the springs.

  1. Replace worn-out parts

As your garage door ages, certain parts will start to wear out and need to be replaced. These include the springs, cables, rollers, hinges, and tracks. Replacing these parts regularly will keep your door working properly for years to come. Some parts, such as the springs, should only be replaced by a professional garage door service.

  1. Inspect the weather stripping

The weather stripping around your garage door helps to keep out drafts and pests. Inspect the weather stripping periodically for signs of wear and tear and replace it if necessary.

Also, make sure that the door’s seal is intact to help keep out moisture, dust, and pests.

By following these simple tips, you can keep your garage door in good working condition for years to come. If you have any concerns about your garage door, or if you need to have it repaired or replaced, contact a professional garage door service for assistance.

By following these simple preventive maintenance tips, you can keep your garage door working properly for years to come.

If you are not comfortable performing any of the above maintenance tasks, hire a professional garage door repair company to do it for you. They will have the experience and knowledge to properly maintain your door and prevent future problems.

Categorized in: