If you plan to renovate your house and make it more beautiful, you probably know that you have many options for the floor. The most common thing people put on is hardwood flooring on stairs. The reason is that wood always looks best wherever you put it.

Hardwood flooring is so popular that people use it all over the house. There is no place where hardwood flooring cannot be placed. You can even combine it with some rugs.

It’s a great emperor of hardwood flooring; that it does not always have to be alone, and it looks nice with every combination. Would you like to know how to install hardwood flooring on stairs with nosing?

Most often, people associate hardwood flooring with the stairs in their house. They wear out from use, and replacement is inevitable. In that case, hardwood flooring can be significant.

And it’s not for nothing that hardwood flooring is mostly used in the world for stairs and house floors. We have prepared a few pros and cons for you to understand its use better:


Image source: Dotter & Solfjeld Architecture + Design

  • Hardwood floors are solid and will last. When you install hardwood, they won’t be of bad quality.
  • Hardwood flooring on stairs is adaptable. It can give a room a warm, comfortable, conventional feel, or it can provide a cutting edge and clean look with an assortment of tones and completes to browse.
  • Hardwood flights of stairs don’t collect as much soil and trash as different alternatives like rugs. This implies cleaning will be speedy and straightforward.
  • For the delicate to tidy, pet dander, and other airborne allergens, hardwood floors are enthusiastically suggested.
  • Stains will not be a worry; on the off chance that you spill something, it’s not difficult to simply wipe up.


  • Hardwood can be pricier than other ground surface material.
  • If you have any four-legged companions, you will realize wood carpet is not, however, pet cordial as rug may be.
  • Even however they are solid, these carpets will show wear and scratches in high rush hour gridlock regions a lot faster.
  • You need to put resources into no-slip stair treads or a hand railing to assist with dependability.
  • Sounds inside your home will be substantially more recognizable with hardwood floors on stairs.


Image source: Mike’s Hardwood Flooring

Edging is a protected method to complete your wood or overlay flooring on your flight of stairs by concealing the edges of the wood flooring where the two wood floors meet.

All in all, edging, the strip is a length of aluminum or plastic that ensures the edges of stairs are not effectively secured by an inherent bullnose or adjusted edge.

Stair nosing is fundamentally accessible in either overlaid/thwarted or in strong wood. Most step nosings either have edges or an enemy of slip property on the track part of the profile.

Which gives you a robust and solid surface to a stair on rather than the elusive completion of the rug, vinyl, or tile. It likewise gives an extraordinary stylish completion to the means. You can discover step nosings in pretty much any tone, finish, size and shape.

Prior to putting any hardwood flooring on your stairs, you should remove the current nose on your flight of stairs.

The establishment of wood flooring on stairs is generally clear and ought to be finished beginning at the lower part of the steps.

Now that you know what Edging is, it is mandatory to know how to install it. Here are the steps:

Prepare your workspace

Whenever you want to renovate or install something, you have to clean the working space first. Stairs must be nicely groomed and have nothing that would interfere with the application of new material.

This is important because you will make a mess later, and then it may end up not the way you want.

Measure the treads and risers 

Measure each piece of each progression of your stairs independently. There are four significant estimations: the track length and width and the risers, generally speaking, length and width.

Risers – Risers are the upward support to your steps. Tracks are the flat advances that show the most significant region on your stairs. The tape measure will help you determine it more precisely.

This is the region you step on while going up or down the steps. Likewise, decide the shade of the completed track and dry-fit the track.

Cut off the treads and risers

Utilize these estimations to cut the treads and risers. Score the track or riser utilizing a rug blade and a straight edge.

This gets through the prefinished topcoat and diminishes the opportunity of damaging the completed surface when cutting with a saw.

Make sure to utilize another saw cutting edge for every flight of stairs to guarantee the cleanest cut conceivable. Spot the wrapped side up to lessen remove when cutting. Recollect that precision is pivotal.

Try not to cut the riser or proceed excessively short. There is no simple fix for this other than getting another board and beginning once more.

Installation of treads and risers

Spot every riser against the edge under. Also, Ensure the track lays flush and level against the risers. Utilize an adaptable glue to bond the wood to the stairs. Installing hardwood stairs is not challenging too much.

Apply development glue to the step, and afterward, place the track board on top, pressing cement as equally as could be expected. Clear off overabundance cement, at that point, nail tracks to their relating stringers.

Never power threads or risers into place. In the event that it’s excessively cozy, eliminate and trim it as important.

In the event that treads or risers are constrained into place, it, in all probability, will not fit as expected and will later create a hole. You can utilize shims to even out the track from front to back and side to side.

You can nail each track or riser into every step stringer with 8-penny finish nails. The utilization of a compressed air firearm is regularly the quickest application technique.

It is suggested that you pre-drill all nail openings when hand nailing to try not to part the track or riser. Keep introducing tracks and risers in a rotating style until the flight of stairs is finished.

Use the stair nosing correctly

An embellishment that covers the edge of each progression and combines the deck is only step nosing. Introduce stair nosing at the high level to change to the hardwood flooring and some other moldings needed to finish the establishment agreeable to you.

Imprint the nosing, at that point slice it to length, depending on the situation, utilizing a hacksaw or tin cuts.

With aluminum nosing, be mindful so as not to leave metal burrs along the cut edge. Test the fit by setting the strip firmly on the edge of the steep track.

Apply step nosing with a similar cement or nailing to guarantee that everything stays immovably set up. Stairs are most secure when they are indistinguishable.

Having nosing on specific means and not others make a slipping danger. Make certain to introduce nosing on the entirety of the means.

If you decide on this move, you will be sure that you have done the right thing. Hardwood flooring on stairs is a great move when you want to beautify your home.

The most important thing is to be at an angle of ninety degrees, but that is learned over time. Don’t worry if you have a little irregular shape at the beginning; you will improve your skills over time.

That was all we have for you today and now you know how to install hardwood flooring on stairs with nosing all by yourself.

If you enjoyed reading this article about how to install hardwood flooring on stairs with nosing, we also wrote about how to remove hardwood flooring, how much hardwood flooring costs, how to repair scratches in hardwood flooring, how to remove glue from hardwood flooring, how to install engineered hardwood flooring, how to lay hardwood flooring, how to restore hardwood flooring, and how to choose hardwood flooring.

Categorized in: