If you’re here to find out how to remove fiberglass insulation from the skin, you’re in the right place. Fiberglass insulation has been around for quite some time now. Originally, it was meant to be a replacement for asbestos, which had carcinogen properties.
But fiberglass insulation is not without health hazards, and it can be extremely unpleasant to deal with this material if it gets onto your skin. In this article, we will take a look at how to remove fiberglass insulation from skin.
Fiberglass is a very beneficial type of insulation; it consists of very fine particles of glass, and it protects our homes from wind, heat, and cold from entering. Fiberglass insulation is found in various different types: the most common one is in combination with a blanket of batts and rolls, as well as loose fill. You can also get fiberglass insulation in the shape of rigid boards and duct insulation. In essence, fiberglass insulation is made from plastic and fiberglass, which gives the plastic extra sturdiness.
Working with fiberglass insulation can cause a few rashes and scratches that are relatively easy to remove. You may want to wear protective attire in order to prevent these tiny fiberglass particles from contacting your skin and your body. Wear long, loose clothes, gloves, a mask, and goggles. Taking these precautions is important to prevent the fiberglass from causing problems in the first place.
In any case, you will want to know how to remove fiberglass insulation from skin, and we will teach you how to do it.
What Effects does Fiberglass have on Skin?
The particles from fiberglass are so small that it is impossible to spot them with the naked eye. It is almost inevitable that these particles will make their way on your skin if you are not wearing some sort of protection. Don’t worry, these particles won’t cause major damage or pain, but you will feel discomfort or itchiness in the area where they have entered your body.
Use Anti-Itch Cream
As fiberglass will most certainly cause itchiness, you will start scratching the skin, and this can lead to additional irritations and problems at hand. To relieve yourself from the scratching, you may want to use an anti-itch cream of some sort, which will not remove the fiberglass but will relieve the symptoms.
Allergy to Fiberglass
Sure, fiberglass can have effects on your body, but even more so if you are allergic to it. You will notice the allergy if the symptoms persist for a prolonged period; 12-72 hours after the contact with fiberglass, you will still notice symptoms of allergy. The allergy is also commonly known as contact dermatitis.
The symptoms, in the severe case of allergies, will persist for days, and maybe even for 2-4 weeks after the contact. They can vary and can range from mild to severe. Here are some of the most common symptoms of fiberglass allergy.
- Blisters containing pus-like liquid
- Dry skin with scales
- Skin hives
- A burning sensation on the affected area
- Sun sensitivity (irritation when the skin comes in contact with sunlight)
- Breathing difficulties similar to asthma
After you have contacted fiberglass, you will notice that your skin will feel itchy, and you may be tempted to scratch. Don’t; you will make the infection or the symptoms even worse by scratching, as the fibers will move deeper into the skin, making them even harder to remove.
Remove the Clothing
Carefully remove the clothing you used when you were in contact with fiberglass; don’t put it next to other, clean clothes. Instead, wash them separately and wait until they dry, hopefully, the fiberglass will be gone by then.
How to Remove Fiberglass insulation from Skin
Let’s talk about the solutions: here’s how to remove fiberglass insulation from skin. There are various ways of removing the fiberglass, and here are some of the most effective ones.
First Remove the Visible Particles
- Wash the affected area thoroughly; use soap and water.
- You can use tweezers for removing the visible particles; soak the in alcohol to sterilize them, and try to remove the fibers.
- If the particle is visible, but you can’t get it out with tweezers, then try to use a needle. First, sterilize the needle in alcohol, and move the particle in such a position that will enable you to remove it with tweezers.
- Once the particle is out, squeeze the area gently to let the blood with the germs out. This will prevent an infection. Then, apply an antibiotic cream to prevent it.
- If there are particles deep in your skin, don’t try to do it on your own; instead, contact your doctor.
Have a Cold Shower
Yes, a cold shower can be unpleasant, but here, it might be a very useful solution. First, you will want to have a cold shower for two minutes, and then have a hot shower for two minutes straight after. The cold shower will close up the pores, which will prevent the particle from going any deeper.
Then, have a hot shower straight after for two minutes. Make sure the water is not too hot; it should be closer to mild than hot. This will open up the pores and the fiberglass particles will start to come out, hopefully.
Use Epsom Salt
Epsom salt can be effective for removing fiberglass. Here is how to remove fiberglass insulation from skin by using Epsom salt.
- Boil a bowl of water, and then take a cup of Epsom salt and put it into the bowl. You will want to let the solution mix up completely, and wait for a few minutes.
- There are two solutions: if the affected area is large, you can take a shower in this solution. If the affected area is your hand, for example, you can dip it into the solution. It will remove fiberglass as well as remedy the itching sensation.
- Lastly, take a cold shower after this for a better effect.
Here is how to remove fiberglass insulation from skin using tape.
- Buy a roll of heavy sticking tape. Duct tape or electrical tape will work fine; it should not rip apart, and the more glue there is, the more effective the tape will be.
- You will also probably require a magnifying glass and good lighting. That is important because the particles are so small that they will most likely not be visible with your eyes. The fiberglass particles will usually be white or yellow.
- With this method, you don’t want to wash the skin first, as water will make the particles harder to remove. Instead, use the tape straight after you come into contact with the fiberglass.
- Press the tape strongly against the affected area. Hold the tape in place for several minutes before removing it. It should have good contact with your skin. After that, remove the tape, and hopefully, the particles will come out.
- Pull off the tape smoothly, don’t force it. Perhaps you will need to repeat the process several times before the itching goes away and the particles come out.
Nylon can be very effective for removing fiberglass, as it attracts it to itself, meaning that it will remove it once it is in contact with it. With this method, you will want to have a hot shower first to open up pores, and then rub your skin with the nylon stockings to remove the fiberglass.
After it, protect your skin with some lotion or baby oil. This will soothe the affected area and prevent itching and irritation.
Protection is Key
Next time, you will want to protect yourself better; use protective gear, and don’t spread the fibers by scratching or rubbing yourself. Hopefully, you now know how to remove fiberglass from the skin.
If you enjoyed reading this article about how to remove fiberglass insulation from skin, you should read these as well: